Our Materials

  • Cut Vinil

  • Printed Vinyl

Features

Cut Vinil

Cut Vinyl is the vinyl that does not have any printing. Its color is the same anywhere on the vinyl, even the back.

Features:

  • 80 micron thick
  • Soft PVC Film with low shine matt finish
  • Good dimensional stability during application and after application.
  • Excellent fire resistance.
  • Adhesion power 6 N/25 mm. (average)
  • Due to its low adhesion power, it allows its placement on any wall without leaving bubbles and later its removal with the greatest safety.
  • Advised temperature for placement > +10° C.
  • Removable from most surfaces without leaving residue. (use heat and/or cleaning products)

Application:

  • Specific vinyl for wall decoration or indoor advertising. (We also have specific vinyl for outdoors, if you want you should contact us before placing the order)
  • We recommend that it is used only on flat surfaces, such as smooth walls, glass, mirrors, doors, sheet metal, laminated wood, vehicles, etc.
  • We do not advise applying self-adhesive vinyl to: walls with latex or silicone-based paints and freshly painted walls (allow to dry for at least 3 weeks).

Cleaning:

  • Do not use abrasive materials.
  • Use a soft cloth and water, or soapy water if necessary.

Surfaces where the material will be applied must be very clean and free of dust, grease and other contaminants that can affect the adhesion of the material. Freshly painted or varnished surfaces should be allowed to dry for at least 3 weeks to cure completely. Compatibility with selected paints and varnishes should be tested prior to material application.

Printed Vinyl

Print Vinyl is vinyl that has printed image or color differences on the same piece.

Features:

  • 170 micron thick
  • Matt protection film with a low-gloss finish, with UV protection.
  • Good dimensional stability during application and after application.
  • Excellent fire resistance.
  • Adhesion power 12 N/25 mm. (average)
  • Advised temperature for placement > +10° C.
  • Bubble Free Technology. (bubble-free application on the toughest surfaces)
  • Removable from most surfaces without leaving residue. (use heat and/or cleaning products)

Application:

  • Wall decoration or indoor and outdoor advertising vinyl.
  • We recommend that it is used only on flat surfaces, such as smooth walls, glass, mirrors, doors, sheet metal, laminated wood, vehicles, etc.
  • We do not advise applying self-adhesive vinyl to: walls with latex or silicone-based paints and freshly painted walls (allow to dry for at least 3 weeks).

Cleaning:

  • Do not use abrasive materials.
  • Use a soft cloth and water, or soapy water if necessary.

Surfaces where the material will be applied must be very clean and free of dust, grease and other contaminants that can affect the adhesion of the material. Freshly painted or varnished surfaces should be allowed to dry for at least 3 weeks to cure completely. Compatibility with selected paints and varnishes should be tested prior to material application.

How to Apply Our Vinyl

You can consult our application instructions here.

Our Suggestions